FRANKONIA – ACTC – Automotive Testing Chamber – AVTC

FRANKONIA AVTC – Automotive Vehicle Testing Chamber

 

Overview	AVTC – Automotive Vehicle Testing Chamber
EMI	CISPR 16-1-4 and ANSI C63.4, full compliant CISPR 25 and CISPR 12, full compliant
EMS	IEC/EN 61000-4-3, full compliant
Test distance	up to 10,0m
Volume	Ø3,0m (typical)
Special	Hybrid or Pyramid Absorbers
ECE R10.5	Full compliant at 3,0 m with dynamometer

 

The AVTC is Frankonia’s automotive anechoic chamber solution at typical 3,0m measuring distance offering a Quiet Zone (QZ) of ø3,0m. It is adapted for radiated emissions and immunity tests on vehicles and components as well as for commercial product tests.

 

The AVTC-L is the extended version of Frankonia’s automotive anechoic chamber solution at 3,0m and 5,0m measuring distance offering a Quiet Zone (QZ) of ø3,0m. The AVTC-XL offer the integration of a normal range dynamometer.

 

Features

• Automotive component and vehicle tests together with commercial tests in a single solution

• Cost-effective and high-performance solution for a 3,0 m or 5,0 m measuring distance

• Floor-absorberboard for an efficient and fast modification of the test setup

• Upgradeable with EDTC components (load machine, BlueBox, battery test system)

 

Typical Product Standards

Emission

• CISPR 11

• CISPR 12

• CISPR 14

• CISPR 15

• CISPR 25

• CISPR 32

• MIL-STD 461

• ECE R10.5

Immunity

• IEC/EN 61000-4-3

• ISO 11451

• ISO 11452

• MIL-STD 461

• RS 101, RS102, RS103

• ECE R10.5

 

Typical Verification Standards

Emission

• CISPR 16-1-4 and/or ANSI C63.4

Immunity

• IEC/EN 61000-4-3

 

Chamber Type	AVTC	AVTC-L	AVTC-XL
External dimension	11.480 x 9.380 x 6.000 mm (LxWxH)	14.780 x 11.480 x 6.300 mm (LxWxH)	16.280 x 12.680 x 6.300 mm (LxWxH)
Quiet Zone at 3,0 m	ø3,0 m	ø3,0 m	ø3,0 m
Quiet Zone at 5,0 m	n/a	ø3,0 m	ø5,0 m
Turntable	ø5,0 m	ø6,0 m	Ø6,7 m dynamometer
Load capacity	up to 30,0 tons; special turntable systems and dynamometer integration
Frequency range	9 kHz/ 26 MHz to 18 GHz (option 40 GHz)

Performance & Compliance

• Full compliant emission (EMI) according to CISPR 16-1-4 and ANSI C63.4

Deviation NSA ±3,5 dB (30 MHz to 1 GHz) – guaranteed

Deviation SVSWR +5,5 dB (1 GHz to 18 GHz) – guaranteed

• Full compliant immunity (EMS) according to IEC/EN 61000-4-3

Deviation FU 0 dB/+6 dB at 75 % of 16 measuring points (26/ 80 MHz to 18 GHz) – guaranteed

• Full compliant emission (EMI) according to CISPR 25 Ed.4 (ALSE verification acc. to the long-wire method recommended)

• Full compliant emission (EMI) according to CISPR 12 at 3,0 m

• Full compliant immunity (EMS) according to ISO 11452 and ISO 11451

• Perfectly meets ECE R10.5 with dynamometer integration

Standard Equipment

· 1 access door, 1.013 x 2.043 mm
· 1 sliding door, 3.038 x 3.093 mm
· 1 mains filter 440 VAC, 4 x 32 A
· 2 penetration panels
· Electric installation
· Feed throughs: 8 x “N”, 8 x “BNC” and 4 x fiber optics
· Illumination
· Raised floor
· Ground plane

· Turntable, 5.0 m diameter, 8.0 to
· Antenna Mast, 1-4 m
· Controller for mast and turntable
· Absorber lining
· 10 honey comb inserts for ventilation

Options
· Additional mains filters
· Signal and / or data line filters
· Non-combustible absorbers
· Measuring equipment
· Floor absorbers
· Video and / or audio system

 

Associated Downloads

Automotive Vehicle Testing Chamber «AVTC»

EMC Chamber pre-installation questionnaire

Installation Manual for Shielded Rooms

Pre-installation Chamber Questionnaire

 Interfaces for Franikonia Anechoic Chambers Data Sheet